My Tank is Here

Brad did a phenomenal job on this tank. The pictures don't do it justice (but are included below, of course). I look forward to seeing it back on the bike soon. Note the retro (60's-70's era) logos and the Corse-style center stripe.

All the dents are gone and the paint looks so deep and glossy. The fairings are smooth and plastic damage has been repaired. I couldn't be happier with the job from Speedzone Paint & Bodyworks. Brad really did a fantastic job with my crashed tank.




Below are images of all three parts that Brad did for me:



Meanwhile, I have also received several parts to complete mods while the bike is in the shop. A little housekeeping is to be done and the DesmoTimes Case Saver Insert is to be installed soon. The rear ride height is going to be raised to quicken turn-in and to compensate for the increased lean angle at rest, a CycleCat sidestand that's a little over 1/2" longer will be used.




To clean up a large amount of tubing mess behind the motor, a Nichols Crankcase Breather and K&N Breather Filter are also going to be installed. As many of these mods have costly parts, the open clutch cover, a SpeedyMoto Flow Design, is going to have to be put off even further. Meanwhile, I have decided to slowly 'spruce' up the internals so when the open clutch cover is installed, there is already a considerable amount of "Bling" to show. To do this, I had already installed Stainless Steel Springs, but I now have Titanium Spring Retention Bolts and Red Billet CycleCat Spring Keepers.



The collection of new parts came from a number of different sources. The vendors include TPO Parts, CA-Cycleworks, and MotoWheels. An image below shows the collection of new parts that will be installed at the beginning of next week (hopefully.)

Parts are in, Tank on the way!

The K&N breather filter Kit, Nichols Crankcase Breather, CRG Mirror, Custom Xenon Headlight, CycleCat Billet Spring keepers & sidestand, DesmoTimes case saver insert, and the like have all arrived, no problems. Parts from MotoWheels, CA-Cycleworks, & TPO Parts. Looks like the full rebuild is a go.

I have CAD'ed up a license plate bracket and bought the sheet of aluminum, I only lack specific hole location measurements now before I start the tail chop process. I'll be ordering frame plugs from DesmoWorld.de, as their plugs have a unique design to them, and I'd like to do business with the guys at that shop. Should something arise and I find the STM plugs on a large discount I won't be hesitating to buy them as I also like the look of those, inasmuch I like any of the billet pieces, just not plastic plugs!

Recent phone call to Brad of Speedzone Paint & Bodyworks. The tank is shipped and billed, I should have it by the end of the week. He broke out the cost for me shown below, the total was $880.00:

• Tank Repair + Ducati 'Rosso' Red Paint - $440.00
• Tank Striping - White Center Stripe - $75.00
• Tank Decals - Retro Logo in White with Black Border - $40.00
• Seat Cowl Repair + Ducati 'Rosso' Red Paint - $135
  
• Headlight Fairing Repair + Ducati 'Rosso' Red Paint - $115
• Seat Cowl and Headlight Fairing Striping - White Center Stripe - $75.00

The $880.00 total (plus free t-shirt) is considered more than justifiable/reasonable to me. The tank had multiple dents, and I wanted a non-standard paint job. The logo's required a third color (black) as an outline on a red tank to make the white decals 'pop' out.

Brad was incredibly easy to work with and I would recommend him to anyone (and I will be recommending him!)

Pictures should be in by the end of the week.

More Parts for the Bike, Tank Update -

Lots of New Parts have been ordered recently. Here's the breakdown (quick and dirty).

From CA-Cycleworks, I will be enjoying a Nichols Crankcase Breather, I didn't forget the crush washer, and while I was there I picked up a matching CRG Hindsight Lane-Split Mirror for my RH Side, as well as the DesmoTimes Case Saver Insert. Might as well pick up the necessities while I'm there I figured.

To go with the Nichols Crankcase Breather, I have ordered the K&N Filter & Air Box Plugs Kit from TPO Parts. While I'm picking things up there, I decided to try out there "Custom Xenon Headlight" for Monsters, as a brighter lighting option. Since things things are adding up, I've chosen to equip the Duc with a less expensive method for letting the rattle out, and that's with the Clutch Cover Spacers Kit.

To take on the predicament of fluid reservoirs at the handlebars for the clutch and brake M/C's, I have decided to go with the Rizoma Bottom Outflow Reservoir's with Window (CT0017) in Titanium. This round the CycleCat bars, which are also in Titanium to give a less conspicuous mounting. The reservoirs are being shipped from PJ's Parts, as I have had several pleasant dealings with them so far.

The last of the parts come again from MotoWheels. To begin the clutch improvement, I ordered the Titanium Clutch Spring Bolts & CycleCat DSK-1 Billet Spring Keepers in Red. The future plan is for the pressure plate to be gold, red caps, behind a titanium color SpeedyMoto "Flow" Cover. The Titanium Spring Bolts and Billet Caps go with the SS Clutch Springs and STM Clutch Pin Holder already installed on the bike. The main reason for this shopping extravaganza began with the CycleCat DKS-35 Billet Sidestand in Silver. This is the slightly longer sidestand to relax the lean angle when the bike is at rest. My stock sidestand is completely nasty and covered with scratches, etc and this will go well with the rear ride height raise that is being done by Corse Motorsports while its in getting put back together.

TANK NEWS:
Brad emailed from Speedzone to let me know that everything looked great and just required a little more time before it was shipped to avoid impressions from the shipping packaging, etc. The decals came out fantastic, and it looks like the bike will be back on the road and running by Christmas.

Tank Repair & Painting

After a quick call from Brad Diez from Speedzone Paint & Bodyworks, I was informed that the tank had been successfully repaired without any problems and was about to be painted. He insured the design we had was as before, Red with White Center Striping, with old-style logos in white with black outlining. The conversation couldn't have gone any better and besides running a top-notch business, Brad was fun to talk to. The tank should be done and back to me in a matter of a few short weeks. Things are finally coming together for this rebuild process and I will be dropping off all of the parts for the bike to Corse Motorsports around Thanksgiving (one week away). Pictures to come soon!

Rizoma Indicators & CycleCat Components

The Rizoma Indicators (Track '01' Style) are in and they look phenomenal. They were shipped practically the same day I ordered them from PJ's Parts - a topshelf company if there ever was any. The price can't be beat for Rizoma products and I had them in a few short days. The finish is fantastic and there length makes me curious as to if I should get a second pair to peak out from behind the fairing on the front. I think they'll look trick as soon as they are installed.

...a topshelf company if there ever was any.

In other news, the bar ends for the CycleCat clipons arrived safely in California at the MotoWheels shop. Once they arrived, I called Brian to order the CycleCat reservoir brackets and they should be shipped out today with the CRG-style bar end sliders to complete my handlebar set up. I'm anxious to see the whole set up on the bike. It looks like I may be ordering the Rizoma Fluid Reservoirs to mate up with my system before the end of the month. (I have a birthday coming up - 11/22). To continue to throw praises at MotoWheels as well, Brian is a topnotch employee, and they "get" the whole customer service idea. A quick phone call, and he remembers me, asks about the bike, etc. It left me with a good feeling about everything when the call was over, and that's the way it should be.