Winter Work - 2007-08

Not too much new for the bike this winter. A set of Ducati Performance Reverse Megaphones has replaced the Ex Box as the classic, or retro look was desired. Gold Anodized Vee-Two cam pulleys have been installed as well as CA-Cycleworks Ignition Coils to liven up the spark. Alain @ Corse Motorsports supplied the work, but obviously the slipons were a breeze to install, and the cam pulleys were relatively painless (said Alain) and just required proper degreeing. The ignition coils installation has been covered ad nauseum so it would be silly to remind you again how painless this install is.



On order from Motowheels is a custom Sargent seat to replace the stiff, improperly angled stock seat. The often colored welt will remain black on my seat, with the Italian Flag on the side and the CarbonFX seat material insert. The seat cowl will still adorn the rear as it fits over the Sargent without too much issue. The underside of the aftermarket seat has increased storage making stowage of a wheel lock or wallet much easier.



Shifting has changed as the bike is now setup with a GP-style shifter from Motowheels. Their new style reverse shifter has an upgraded curved look with your choice of anodized color for the toe piece, but is unfortunately too long for Monsters with the large diameter bolt kickstand and stock rearsets. Their other unit, with replaceable toe piece is shorter, however, and should work fine. Riding with the new shift pattern may be tricky but a post-it on the tach reminding "down for up" will help me. Pictures will be featured below within a few days.

Next up on the list? Tail Chop, Reworked forks, New
rear suspension, clutch plate & cover.

A Work In Progress

It is unfortunate that the Spiegler lines do not fit correctly just yet, so the rebuild progress has slowed significantly until the problem is remedied. The good news is that Brian at Motowheels was kind enough to go out of his way to contact the manufacturer and arrange the proper corrections to be made.

Since these lines run through the front fairing area is would be silly to take the time to place new gauges on just to take them back off. So that is also waiting for a time. The new CycleCat top triple clamp does not use the standard '99 fairing mount brackets so the use of my new painted fairing will be limited. A fellow DML'er has traded me (money for parts) his new style fairing off a 2000 M900 which will fit the bill perfectly. It will be sent out to be striped when the bellypan is sent to be painted and will be installed at the same time as the new top triple.

In other news, a similar transaction occurred with fellow DML Ducseven, who is having to part out his M900. This is terrible for him and the bike (it was very well done) but it benefits me as I will be the proud owner of a Rizoma Billet Suspension Arc and rear wave rotor soon. He's a pleasure to do business with, but it is unfortunate for him to have to part out his Monster.

Without further ado, here are some pictures of the current build progress.



The new tank paint job and front end work can be seen here.



The wiring still needs to be hidden behind the frame, but this shows the removal of the side panel and rear hugger, the Nichols breather, Axle Adjuster Plates, and more of the new paint job. Things really seem to be coming together.

And this is THE Alain, who has helped so much. Notice him pulling the "Wilson" from Home Improvement:


One last shot from the front of the Duc showing the work-in-progress front end.